Spanet SV Mini 1(3.0kw) Kit – 2 x 1sp AMP Cord

Spanet SV Mini 1(3.0kw) Retro Kit
This retro kit comes complete with the following:
Controller, Touchpad, 3.0kw Heater Element, Variable Colour LED Light and 2 x Single Speed AMP Cables.
 

• SV Mini 1 230volt outputs
• PUMP 1 , Circ Pump, 1Spd Pump or 2Spd Pump(the pump on this outlet must be pushing water through the heater)
• AUX, 1Spd Pump or Blower
• 230V, this outlet has a constant 230volts and is not switchable (can be used to power a heat pump or any other item requiring a constant 230volts)
• O3/UV, this outlet is only to be used with an ozone system
• SV Mini low voltage outputs
• 1 x Touch pad outlet
• 1 x Light  port(can only fit a Spanet SV Series Light in 2.5″ or 5″)
• 1 x Heat Pump Port
• 1 x Wifi Port
• SV Mini Power Ratings
• Input Voltage: 220-240volt 50/60hz
• Rated with mains lead: 15amp max
• Rated when hard wired: 25amp max
• Current rating: this unit is supplied with a 15amp lead and plug but the lead can be removed and the SV Mini can be hard wired with a 25amp power supply.

SV Mini Features

• In heater temp sensor
• Max Temp 41 degrees
• Adjustable Filtration
• Sleep Timer
• Heat Pump Interface
• Wifi Interface
• Programmable Load Shedding

Dimensions
Control box: 315W x 210H x 85D mm
Power lead: 3m
Heater including unions: 310W x 135H x 100D mm
Heater Power Lead: 1.5m (heater lead is hard wired into the controller)
Heater Data Lead: 1.5m
Touch Pad Face Size: 130W x 60H x 30D mm
Touch Pad Hole Size 110W x 40H mm
Touch Pad Lead: 2.3m