Log in Sign up
Cart (0)
(Balboa Retrofit Kit 3.3) Balboa BP6013G1 + TP600

(Balboa Retrofit Kit 3.3) Balboa BP6013G1 + TP600

PK-BBP33

Aquarius Spa Parts

$2,278.35

Tax included.
Type of Product: Balboa electronic control pack
Manufacturer: Balboa
Power: Volts: 230vac Hz: 50
Specifications:
Compatible With:
Connections: 2-inch socket heater union sleeves. Amp cables plug into the PCB to operate the components.
Dimensions: Length: 500 mm (inc heater) 320 mm (box casing only) Width: 120 mm Height: 300 mm Topside: 178 mm x 86 mm
Topside Buttons: JETS AUX FLIP screen WARM LIGHT COOL
Items Included: 1 x WIRE PUMP 2 SPEED 2 x WIRE PUMP SINGLE SPD 3 x AMP cable with 3 pins 2000mm cable 1 x SPA LIGHT ASSY W/O LENS 1 x BEZEL RETROFIT PANEL TP600
Additional Notes: System Outputs:
  • Pump 1 230VAC
  • - 2-Speed 6.5A - 12A max 15-minute timer (30-minute timer for P1 Low in non-circ setups only)
  • - 1 Speed in Setups in Setups 2 4 6 Pump size is dependent on service available (16A vs. 32A) other equipment installed and if A5 is set to ON for Special Amperage Rule B. in Setups 1 3 5 this is the heater pump. Must deliver 20 GPM through heater
  • Pump 2 230VAC
  • - 1-Speed 6.5A - 12A max 15-minute timer Pump size is dependent on service available (16A vs. 32A) other equipment installed and if A5 is set to ON for Special Amperage Rule B. Used in setups 1 2 & 7
  • Blower 230VAC
  • - 1-Speed 4A max 15-minute timer Used in Setup 3 4 & 8
  • Circ Pump 230VAC
  • - 1-Speed 2A max Programmable Filtration Cycles + Polling This is the heater pump in Setups 2 4 6 - 9. Must deliver 20 GPM through heater
  • Ozone 230VAC .5A max
  • - Slaved to Circ Pump in Circ Setups 2 4 6 - 9. - Independent in Non-Circ Setups 1 3 & 5.
  • Spa Light 10VAC On/Off 1A max 240-minute timer.
  • A/V (Stereo) 230VAC Hot 4A max Always on
  • Heater 3.0kW @ 240VAC max

The M7 technology means you do not need to have sensors and flow switches going back into the tub as everything is done inside the control box by 2 sensors.

This system has been designed to be able to run from the comfort of your home or whilst you are at work or away. With the addition of the new WiFi receiver the BP2100 can be operated via Android® iPhone® iPod touch® or iPad®

This is a generic unlicensed control box. This unit must be fitted by a competent individual or tradesman. Incorrect installation could invalidate the warranty.