Spanet SV Mini 2(1.5kw) Kit – 1 x 2sp & 2 x 1sp AMP Cord

Spanet SV Mini 2(1.5kw) Retro Kit

This retro kit comes complete with the following:

• Controller, Touchpad, 1.5kw Heater Element and 2 x Single Speed AMP Cables and 1 x Two Speed AMP Cable.
• SV Mini 2 230volt outputs:
• PUMP 1: Circ Pump, 1Spd Pump or 2Spd Pump(the pump on this outlet must be pushing water through the heater)
• PUMP 2: 1spd Pump(10amp Max)
• PUMP 3: 1spd Pump(10amp Max
• BLOWER: Blower(4.5amp Max)
• 230V, this outlet has a constant 230volts and is not switchable (can be used to power a heat pump or any other item requiring a constant 230volts)
• O3/UV, this outlet is only to be used with an ozone system

SV Mini low voltage outputs:

• 1 x Touch pad outlet
• 1 x Light port (can only fit a Spanet SV Series Light in 2.5 or 5 )
• 1 x Heat Pump Port
• 1 x Wifi Port
  

SV Mini Power Ratings:

• Input Voltage: 220-240volt 50/60hz
• Rated with mains lead: 15amp max
• Rated when hard wired: 25amp max
• Current rating: this unit is supplied with a 15amp lead and plug but the lead can be removed and the SV Mini can be hard wired with a 25amp power supply.
  

SV Mini Features:

• In heater temp sensor
• Max Temp 41 degrees
• Adjustable Filtration
• Sleep Timer
• Heat Pump Interface
• Wifi Interface
• Programmable Load Shedding

Dimensions:

• Control box: 315W x 210H x 85D mm
• Power lead: 3m
• Heater including unions: 310W x 135H x 100D mm
• Heater Power Lead: 1.5m (heater lead is hard wired into the controller)
• Heater Data Lead: 1.5m
• Touch Pad Face Size: 130W x 60H x 30D mm
• Touch Pad Hole Size 110W x 40H mm
• Touch Pad Lead: 2.3m